Add motion: appear, count up, scroll, ticker and hover

Make elements appear, count numbers up, move as visitors scroll, keep moving by themselves, or react when the pointer is over them.

Updated 18 Nov 2026

Effects add motion to your page. An element can have one effect of each kind: Appear (it comes in), Count up (a number runs up to its value), Scroll (it moves as the visitor scrolls), Ticker (a row that keeps moving sideways) and Hover (it reacts when the pointer is over it). They can sit together on the same element.

Add an effect

  1. Click the element on the canvas.
  2. In the panel on the right, open the Effects tab, next to Styles.
  3. Click Add, then choose a kind. The menu groups them: When it shows, While scrolling, Moves by itself and Pointer. A kind the element already has is greyed out.
  4. Press Play this effect (the round arrow on the card) to watch it on the canvas. A ticker keeps running until you click anywhere on the canvas.
  5. Publish your site. Effects show on the live page, not while you edit.

Choose Text, word by word instead when the element is a text block, such as a heading or a paragraph. It does not appear in the menu for other elements.

The Appear settings

  • Start from: where the element begins. Fade, Rise, Drop, From the left, From the right, Grow or Unblur. The numbers below it change when you pick one, and you can edit them yourself.
  • Plays: On load plays as soon as the page opens. In view waits until the visitor scrolls to the element.
  • How often: Once, or Every time the element comes back into view. It shows only when Plays is In view.
  • Opacity, Move Y, Move X, Scale and Blur: how the element looks at the start. Leave a box empty to leave that part alone.
  • Feel: Ease is a smooth slowing down. Pick a Curve: Slow down, Speed up, Smooth or Steady. Spring adds a little bounce. Use the Bounce slider. Takes is how long it lasts, in seconds.
  • Delay: how many seconds to wait before it starts.
  • Children one by one (Appear only): the blocks inside the element come in one after another instead of the element moving as a whole. Gap between them is the wait between each, in seconds.

Text, word by word

The text card has the same settings, plus:

  • Split into: Letters, Words or Lines.
  • Gap between pieces: the wait between one piece and the next, in seconds.

Screen readers hear the sentence once, not word by word. Search engines see plain text.

Count up

Count up makes a number in a text run up to its value, such as 0 to 1.2M+, when a visitor reaches it. It works on a text block that has a number in it. In the Add menu it is greyed out, with the reason, when the element is not a text, when the text has no number, or when the text already has Text, word by word.

  • Number found: the card shows which number it will count and what stays as you typed it. In "1.2M+" it counts 1.2 and leaves "M+" alone. It keeps the same decimal places and thousands commas as your number.
  • Count from: where the count starts. Usually 0.
  • Plays and How often: the same as Appear.
  • Feel: Ease only, with a Curve and Takes in seconds. Spring is switched off for numbers, because it would shoot past the number and come back.
  • On phones: Same, or Off to show the number straight away on a phone.

Only the first number in a text counts. For "24/7 support" that is 24. To count two numbers, put each in its own text block. If the number is a year, such as 2018, counting from 0 runs through a thousand years, so set Count from to something closer, like 1990.

To change the number, edit the text. Your published page always holds the real number, so search engines and screen readers get it. If you later take the number out of the text, the card tells you it has stopped and the text shows as typed.

Scroll

Scroll changes how an element looks as it travels up the screen. Pick one effect: Parallax, Fade in, Rise in, Grow in or Fade out as it leaves. Parallax makes an element move a little slower than the page, so it feels deeper.

  • From and To: how the element looks at the start and at the end. Each has Lift (pixels), Size and Opacity. Changing a number turns the effect into Custom.
  • Starts and Ends: where along its trip the change happens. 0% is the moment the top of the element reaches the bottom of the screen. 100% is the moment its bottom leaves the top of the screen. Fade in is 0% to 35%, so it is fully in before the element is a third of the way across.
  • Smoothing: Off follows your scrolling exactly. Soft and Strong let the element glide a little behind. Smoothing adds a small script to that one element, so leave it Off unless you want the feel. If Smooth scrolling is on for the whole site, the element already glides with the page, and the card tells you so. Smoothing here adds a trail on top. Most pages need only one.
  • On phones: Same, or Off to keep the element still on a phone.

Ticker

A ticker keeps the items in a row moving sideways, like a strip of customer logos. Put the items in a row (a box with two or more items in it), select the row and add Ticker. With fewer than two items the Add menu says Needs a row with 2 or more items, and if you remove items later the card tells you it has stopped.

  • Direction: Left or Right.
  • Speed: pixels a second. Most tickers feel right between 20 and 70.
  • Gap: the space between items. Leave it empty to keep the row's own gap, so the join where the row loops is not visible.
  • Fade the edges: soft edges, so items do not cut off hard.
  • Pause on hover: the ticker stops while the pointer is over it.
  • On phones: Same, Slower (about two thirds of the speed) or Off. With Off the row stands still and can be swiped.

The ticker stops by itself while it is off screen. Screen readers hear each item once, not the repeats.

Hover

Hover changes an element while the pointer is over it, and back again when the pointer leaves. Pick a Preset: Lift, Grow, Lift and grow or Dim, then change the numbers if you like.

  • Scale, Lift, Opacity and Shadow (None, Soft, Medium or Strong).
  • Feel: the same Ease or Spring, Curve and Takes as Appear. Hover usually takes about 0.4 seconds.
  • Also when focused with the keyboard: on by default, so a person using the Tab key sees the same change.

Hover needs no script, so it adds nothing to your page's loading. On a touch screen there is no pointer, so nothing happens.

Smooth scrolling for the whole site

Smooth scrolling makes every page glide to a stop when a visitor scrolls with a mouse wheel or trackpad. It is one setting for the whole site, not an effect on one element.

  1. Open Site settings, then General.
  2. Find Scrolling, under Accessibility.
  3. Next to Smooth scrolling, choose Soft or Strong. Strong glides for longer. Off is how browsers scroll on their own, and is where every site starts.
  4. Publish your site. The change shows the next time you publish.

While it is on, links to a spot on the same page, like "Contact", glide there too and stop just below a top bar that stays on screen. Menus, maps and pop-ups that scroll inside themselves are left alone. Every page loads one small extra script. The editor itself always scrolls normally, so check the glide on your published page.

Phones and tablets keep their own scrolling, so smooth scrolling does nothing there.

Visitors who turn motion off

Some people switch off motion on their device. They still see your whole page. Elements with a scroll effect sit where you designed them, tickers stop and can be swiped, hover changes only shadow and fade, and counting numbers show their final value. Smooth scrolling is switched off for them too, so the page scrolls the normal way. You do not need to do anything. The Effects tab also tells you if your own computer has motion turned off, because then it looks different from what you set.

Remove or fold an effect

Use the bin icon on the card to remove the effect. Use the arrow icon to fold the card away while you work on something else.

Common questions

Why can I not see the effect while I edit? Effects are played on your published page. Use Play this effect to preview on the canvas.

Can one element have more than one effect? One of each kind. An element can have Appear, Count up, Scroll, Ticker and Hover together. It cannot have two Scrolls, and a text cannot have both Count up and Text, word by word. Put the element inside a box and give the box the second one.

The Effects tab says the element has no box. The page itself, and a text block set to show no tag, cannot take an effect. Put it inside a box first.

Does it slow my page? Only pages that use an effect load what it needs. Hover loads no script. Scroll loads one only if you turn on smoothing or the visitor's browser needs it. A page with no effect loads nothing extra.

What if a visitor turned motion down? See Visitors who turn motion off above. If a browser has scripts switched off, everything shows too.

Can the AI add effects for me? Yes. Ask it, for example: "make the section headings appear word by word", or "slow the logo row down".

Where did the old effect presets go? They are still under Styles, in Effects. They are style settings with their own rules. An element can have one of those and one effect from this tab, and both will play.

More in this topic

Back to Help centre

Still stuck?

Write to us and a person replies.

Email [email protected]